Insulation
on outside walls

Insulation on outside walls

Walls are responsible for about 20% of heat loss in a house. Insulating walls from the exterior enables them to accumulate and retain heat. In summer, Aluthermo® also protects the house from solar radiation.

Discover Quattro

The installation

Fasten a framework of timbers measuring 30 mm thick by 5 cm wide to the wall to be insulated. Unroll the Aluthermo® insulation horizontally over this framework, forming an overlap of at least 5 cm between successive strips.

Seal the overlaps and joins with the special aluminium adhesive tape supplied by Aluthermo.

Provisionally fasten the Aluthermo® insulation by stapling it to this wooden framework. The vertical timbers of the framework must be spaced at approximately 60 cm apart. The perimeter timbers must be positioned flush with the horizontal and vertical limits of the surface to be insulated.

This framework establishes a stable air gap between the Aluthermo® insulation and the insulated wall.

Then fasten the counter-battens to the framework for the final metal or timber cladding.

isolation mur extérieur avec quattro

Find a retailer

Our product recommendation:

I opt for QUATTRO for maximum space saving

QUATTRO – 10mm
An ideal “all in one” solution as it acts as an insulation material, vapour barrier and roof membrane. An ultra-thin, multi-reflective and with 4 layers of aluminium multi-layer insulation material which is thermally-welded across all its surfaces.

Our thin insulation products

ROOFREFLEX
37mm.

An insulating, reflective roof membrane that is watertight and highly vapour-permeable. EPC & LABC certified.

QUATTRO
10mm.

An ideal «all in one» solution as it acts as an insulation material, vapour barrier and roof membrane. For a maximum of space saving.

DENSIMA
37mm.

Insulation, vapour barrier and roof membrane combined in one product. Made thicker to comply with European standards. EPC & 2020 certified.

OPTIMA
42mm.

A reflective insulation material made thicker to comply with EU standards. Mainly used on roofs or as a vapour barrier on walls. EPC & LABC certified.

REVERSO
37mm.

An insulating and reflective vapor barrier.
Used on the roof or on interior walls, it protects against vapour.
EPC certified.